MOD ACR-CT

QUALIMAGIQ software module for an automatic advanced image quality control with an phantom ACR

Quote

Connected to the QUALIMAGIQ platform, it takes the MOD-ACR-CT module only 2 mouse clicks to analyse the numerous DICOM slices originating from the 5 sections of the ACR phantom acquired for the advanced controls of the image quality of a CT-scanner.

These automated analyses cover:                                                                                                                                                                                               

 

 

  •  Alignment of the external (biopsy) or not internal lasers;
  •  Geometrical distorsions;
  •  Slice thickness;
  •  Sensitivity profiles;
  •  Sensitometry with 4 different reference materials;
  •  Spatial resolution: FTM with 2 methods, the Droege and Morin method in a bar pattern comprising 8 spatial frequencies and with the PSF method;
  •  Pixel size;
  •  Low level contrast resolution;
  •  Noise, uniformity, homogeneity and water signal.

 

 

Specifications

Less than 10 minutes is all the time you need to perform the entire control: installation of the phantom, image acquisition and analysis, yielding 6 different PDF analysis reports and a trend curve for each tested parameter.

This module enables you to optimally fulfil requirements of the French Agency AFSSAPS decision dated 27/07/07 regulating the procedures for Internal quality control of CT-scanners: points 8.4 (internal QC) of the annex.

 

Associated test object: CT-ACR-464 from SunNuclear.

Resources

You need a user manual? please contact us.

FAQ

Your brochure request has been added to your Download Cart.

 

At the end of your visit:

 

  • Please click the "YOUR DOWNLOADS" button at the top right,
  • Complete the form and SEND it.

 

You will get the documents shortly by email.